Where do I put the reference code listed with an online job posting?
Q. Many job postings on Monster.com and Craigslist have reference codes listed by the employer. For example, one law firm includes "Reference Code: RAD - Admin. Asst." at the end of the ad. Do I include this in the subject line or in the body of the email? Or do I omit it all together? Please, only answer if you know for certain...I can play the guessing game on my own. Thanks in advance for your help!
Asked by Ciespi - Tue Jul 10 19:03:36 2007 - - 1 Answers - 0 Comments

A. Like everything else, this answer depends on the lister. First choice is to include the reference code in the subject line on the email response.: In the body of your cover letter write: Responding to your reference code listed as RAD-Administrative Assistant There may be listings where they specifically ask you to include it in the subject line, or in the first paragraph of your cover letter: If no such direction is given, list the information directly beneath the attention: Individual Name, in direct indentation write the subject reference number and the source from which you got the number. Good luck in your search.
Answered by Solutions - Wed Jul 11 14:55:33 2007

What does a irs reference code 1221 means?
Q. Refund was suppose to be deposit on 2/8, but I checked it again today and I received a code 1221. Does anyone have an idea what that means?
Asked by kandice - Thu Feb 7 16:46:46 2008 - - 6 Answers - 0 Comments

A. 1221 Refund delayed, pulled for review, within 7 cycles conduct account analysis Here are all the codes: Reference Code Status Description IRM 1001 Refund paper check mailed more than 4 weeks ago See IRM 21.4.1.3.4, Refund Issued But, Lost, Stolen, Destroyed or Not Received 1101 No data, taxpayer filed paper return more than 6 weeks ago See IRM 21.4.1.3.1.1, Return Not Found 1102 No data, taxpayer filed electronic return more than 3 weeks ago See IRM 21.4.1.3.1.1, Return Not Found 1021 FMS part offset, check mailed more than 4 weeks ago See IRM 21.4.1.3.2, Return/Refund Located 1061 FMS part offset, direct deposit more than 1 week ago See IRM 21.4.1.3.2., Return/Refund Located 1121 Problem identified; P-Freeze IRM 21.5.6.4.23, P-… [cont.]
Answered by Michael B - Fri Feb 8 14:46:49 2008

Is there a code reference available for SiSoftware Sandra?
Q. I am using Sandra to diagnose potential problems with the computer and I'd like to find a reference for the "Notice and Tip" codes (other than the brief details provided in the report). I have check their website and have searched the net over trying to find this information. A URL would be greatly appreciated!! Thank you in advance!
Asked by C K - Wed Dec 23 07:16:37 2009 - - 1 Answers - 0 Comments

A. visit this link
Answered by ali the coolest - Sat Dec 26 23:31:01 2009

what does reference code 1221 mean specifically?
Q. I have been waiting for over two weeks for refund that is continually getting delayed. I got a code 1201 and now I have code 1221. What does this specifically mean and what is the IRS looking for. When I called they were extremely vague and like many of us, I am waiting on my refund just to even pay my rent.
Asked by Sarah B - Fri Feb 13 09:00:30 2009 - - 2 Answers - 0 Comments

A. Um in the same situation as you. I've been waiting for my refund since 1/17 first it was a dd date of 1/30 and then delayed to 2/24. I've had the same reference codes as you... N0w i'm @ 1221. They irs reps told me that i am to expect a cp05 letter in the mail. So you will probably get one, too. I asked them what is the letter for and they said just to let you know that you taxes are being reviewed! So they are probably reviewing yours, too. -G00D LUCK!
Answered by LAYDEE_B - Sun Feb 15 12:09:33 2009

Did anyone receive a refund that got the 1301 reference code yet?
Q. I filed on 01/26/10 and I had that error. Anyone else? Did your refund come yet?
Asked by MARTIN - Mon Feb 15 16:27:57 2010 - - 2 Answers - 0 Comments

A. I filed same day and still have the same code. this week marks 3 weeks sinc eI filed and I am crossing my fingers that it updates this week to a date of deposit!
Answered by Genevieve R - Mon Feb 15 18:43:03 2010

Anyone with reference code 1121 actually receive refund by DD or check yet?
Q. Anyone with reference code 1121 actually receive refund by DD or check yet?
Asked by bostwicka - Tue Feb 26 01:22:43 2008 - - 5 Answers - 0 Comments

A. 1121 is a p-freeze which means your account has basically been frozen until further review. Many of us went thru this last year and never really got any answers from the IRS. If you call the IRS and ask them if your account is frozen,...they have to tell you yes or no. If it is a freeze, you can expect a very long wait. If you are experiencing a hardship due to the delay you can request a taxpayer advocate to assist you in getting your refund released. This is due to increased enforcement by the criminal investigations unit and technically they don't have to give you a reason for the delay...1121 is a freeze for sure! To give you an idea on how long you can expect to wait...last year I filed in January and was due a refund on 1/26/07. I… [cont.]
Answered by Riannaa - Thu Feb 28 09:56:58 2008

Does anyone know what the IRS Reference Code 1201 means?
Q. Our code was 1121 and now since Thursday it has been changed to 1201. Has anyone talked to someone who knows what they are talking about at the IRS or had to this happen to them.
Asked by Joe - Mon May 4 11:44:34 2009 - - 3 Answers - 0 Comments

A. It means a human (auditor) is going to look at your tax return. Possible reasons: Investigate EIC and/or child tax credit Investigate dependent deductions Investigate filing status Investigate deductions Investigate injured spouse form Investigate some other tax credit. Those are the common ones.
Answered by Chuckie O - Mon May 4 12:04:17 2009

Does anyone have an avon reference code im the one the district manager gave me one that doesent work?
Q. Does anyone have an avon reference code im the one the district manager gave me one that doesent work?
Asked by mandee - Sun Feb 7 15:19:48 2010 - - 2 Answers - 0 Comments

A. Actually mandee you would sign yourself up online via and you may use reference code lynettebledsoe if you haven't already done so
Answered by Determined Avon Mom - Mon Feb 8 08:24:44 2010

anybody still at reference code 1121 with no answers and no new DD date?
Q. anybody still at reference code 1121 with no answers and no new DD date?
Asked by bostwicka - Thu Feb 21 08:39:57 2008 - - 3 Answers - 0 Comments

A. I have had deposit dates of 1/25, 2/19 which change to 2/8, then to 2/15. Then start getting the codes 1221, 8002, 1121 and today 8002. I've been waiting over a month and the irs reps don't really have a clue about any of the codes. I've called several times about all the codes to be told nothing wrong with my taxes. So, know I just continue to wait.
Answered by DIAMOND - Thu Feb 21 14:48:38 2008

Is anyone still waiting for their federal tax refund with reference code 1201?
Q. 1201 is the reference code I was given when I checked for my refund status...it said my refund was delayed and it gave me ref. # 1201. Jenny- Please let me know what you find out..this is crazy.
Asked by mclay - Wed May 9 17:37:50 2007 - - 3 Answers - 0 Comments

A. What they tell Jenny will do you no good. ALL error codes from the IRS website are general categories of issues. Without looking at YOUR account, no one can tell your why your refund has been delayed.
Answered by STEVEN F - Wed May 9 18:26:59 2007

Had Reference Code 1301 now it is back to 2/10 processing?
Q. Does anyone think I might get it tomorrow after all? yes I am in full compliance and what is with you and your smug answers ?
Asked by Robin M - Thu Feb 5 21:43:02 2009 - - 3 Answers - 0 Comments

A. Mines said 2/10 and but it updated last night. Miss Angel, youre a bitch btw.
Answered by Abimael C - Thu Feb 5 23:22:47 2009

I live in NH and I am looking for a good code reference for building my deck. Thanks joe_oconnell@hotmail.com
Q. Looking for Beam sizing, joist sizing, post sizing, post location and stuff similar to that. Thanks for reading this email me at joe_oconnell@hotmail.com or anfitch151@hotmail.com.
Asked by Joe O - Wed Mar 12 12:17:37 2008 - - 2 Answers - 0 Comments

A. The International building code is usually acceptable by all municipalities. Footings are to be dug 16"x16"x 10" deep. There are to be 8" of concrete in the bottom of the hole and the post is to be set on the footing and 2" around the post. The support posts are to be 6x6's and The outside frame is to be one size larger than the joist size. a 2x8 will span 12'8" and a 2x10 will span 16'8". Posts should be spaced no more than 10' apart and handrail posts a maximum of 8' apart.(If the support posts are going all the way through rather than the deck built with a girder for support, I space the posts no more than 8' apart) Spindles have to be spaced so that a 4" sphere cannot pass through between them. Stairs may not have more than a 7 3/ [cont.]
Answered by bossdog - Wed Mar 12 14:22:13 2008

Can any licensed plumbers in Ontario let me know what the code is concerning saddle valves, and a reference?
Q. I'm an HVAC Tech, and have heard many rumors that saddle valves are now prohibited under the plumbing code, and would like to confirm this. Any references to the plumbing code would be appreciated. Thanks
Asked by Joe S - Thu Nov 1 21:48:24 2007 - - 2 Answers - 0 Comments

A. Not sure about code BUT I would go the extra & put in a "T" with shut off valve , The old saying do it right the first time, Do,nt get in to habits for the sake of time and $$$ Just checked with a buddy YES it is leagle He,s an Heatng Tech
Answered by loverichard@rogers.com - Fri Nov 2 05:24:32 2007

Why am I getting reference code 9001 when checking the status of my refund? Is Anyone else getting this code?
Q. I been getting this code like three days after I was accepted on the 17th! I didn't want to call. Just wanted to sit and wait it out since my scheduled dd date is Jan.29th!! Has anybody called about this code??? :O
Asked by Jit88 - Wed Jan 27 13:48:45 2010 - - 6 Answers - 0 Comments

A. i got the code 9001 and just received a letter in the mail 20 minutes ago saying it is being reviewed for one of the follwing reasons 1. income i reported on my return 2. income tax witholding amounts 3.claims for tax credit made 4. business income i reported on my return and neither of these refer to me, i claimed head of household with a dependent my return is 100% accurate, and they also state "they know your refund is important to you",but if any additional information is needed they will notify. they just don't want to give up the f***ing money without a fight,and it's only $5676.00,and i'm in florida
Answered by SQUIRTBO - Fri Jan 29 14:59:16 2010

Reference code 1221-from the IRS....what is that?
Q. I efiled on 2/8. I was supposed to receive a refund on 2/27. Date was changed to 3/13 due to processing delays. Now I have error code 1221, and this message: We have received your return and it is being processed. For more information, please continue. Before You Call: * If you do not receive your refund within the next 4 weeks, call us at the number shown on this page. When you call have this information ready: * A copy of this page. * A copy of your tax return. * The Social Security Number, Filing Status, and refund amount claimed on your return. * Any notice that you have received concerning your refund. Please mention reference number 1221 to the IRS Customer Service Representative. IRS Hours of Service: Monday… [cont.]
Asked by MissTeez - Sat Mar 10 18:49:09 2007 - - 2 Answers - 1 Comments

A. Your return has been pulled for exam. call the number on the letter
Answered by Rob - Sat Mar 10 18:52:56 2007

Reference Code 1201 Delay in Refund Owe Back Taxes?
Q. Has anyone ever owed the IRS, not set up on a payment plan, and had this code on WMR...THEN get their refund on time?
Asked by Blair - Thu Jan 28 08:58:58 2010 - - 2 Answers - 0 Comments

A. I saw someone else's answer to this same question and they said they did. However, my experience was that it delayed the refund by one week.
Answered by Shikona J - Thu Jan 28 09:03:45 2010

I E-filed on 4/14 for direct deposit. IRS web site says delayed with a 1201 reference code. Any ideas?
Q. I E-filed on 4/14 for direct deposit. IRS web site says delayed with a 1201 reference code. Any ideas?
Asked by bgsquam - Wed Apr 30 15:08:32 2008 - - 4 Answers - 0 Comments

A. no clue sorry :0(
Answered by Tammy B (Gabe's Mom) - Wed Apr 30 15:13:56 2008

How can I stop this error code? "Object reference not set to an instance of an object"?
Q. Does anyone have any idea?? I looked it up and cannot understand all that computer jargon, so I cannot fix it, anyone know step by step for laymen?
Asked by angel - Fri Jan 25 11:12:17 2008 - - 1 Answers - 0 Comments

A. you're trying to do something on a window that's not the top window, or you've closed a window that you're trying to do something with. (for exampe, an "ok" button for an option in a window that's already closed or minimized? try pressing alt+tab and finished what needs to be done on a previous window first.
Answered by (Oracle of Delphi) - Fri Jan 25 14:01:14 2008

VB code: How do you reference radio buttons in a function?
Q. How do you reference radio buttons in a function? The assignment is to create a simple program that will convert Fahrenheit to Celsius and Celsius to Fahrenheit. To do that, I added a group box with two radio buttons, one each for Fahr. and Cels. My professors only criticism was with the radio buttions. His exact response was, "Reference radio boxes in function: -13 pts." I am just wondering what this means so I can correct it. Any ideas?
Asked by Jennifer M - Tue Jul 1 00:02:47 2008 - - 4 Answers - 0 Comments

A. Hi, suppose the name of the radio button is Option1 and function name is fn() then then either pass this radio button as parameter to the function as below: Private Sub Command1_Click() MsgBox a(Option1) End Sub Public Function a(o As OptionButton) As Integer If o.Value = True Then a = 1 Else a = 0 End If End Function if u do not want to pass parameter then use the complete reference of the radio button, i.e., if Option button is on form1 then use Form1.Option1. This works wherever ur function be, either in another form or in any module.
Answered by iqbal - Tue Jul 1 01:11:51 2008

Was reference code 9001 now changed to 1201?
Q. What does that mean? Anyone elses change to this?
Asked by kristin2_4 - Wed Feb 10 09:14:17 2010 - - 3 Answers - 0 Comments

A. i have 1201 and i talked to the irs yesterday and thay told me that i did not owe back taxes from last year or any year so it it dose not mean you owe you might but you might not.call them i did thay said it was a delay and it should be dep in1 or 2 weeks.but i never had code 9001
Answered by Tonya - Wed Feb 10 13:38:49 2010